Clean the whirlpool tub cover at least once a month.

Step 1: Remove the cover and place it on a flat, clean surface near to a garden hose.

Step 2: Rinse the cover to remove loose dirt.

Step 3: Clean the top side (vinyl) of the cover using a mild washing-up liquid and a soft bristle brush. Carefully rub down the cover making circulating movements and make sure it only dries off after being rinsed with water again.

Step 4: Carefully rinse the cover and dry it with a clean cloth.

Step 5: Use saddle soap (and no oil-based products) to clean the cover in accordance with the manufacturer's instructions.

Step 6: Wipe and rinse off the dirt on the underside of the cover.

Step 7: Refit the cover and secure the closures.

NOTE: Use lighter fuel to remove tree sap, but use it sparingly. Then immediately treat the area with saddle soap.